Application:

Motor slip coupling running 2-3 shifts/day.

Benefits:

* Finned design for 70% higher heat dissipation.
* Sealed design for contaminated environment.

Torque:

10-26 in-lbs @ 300-100 rpm.

Clutch:

* 3.25" dia. x .625" bore x 2.17" long.
* Output adapter with .500 dia. shaft.
* 40 watts heat dissipation.

Application:

Tensioning in factory running 2 shifts/day.

Benefits:

* Virtually unlimited life except bearing wear.
* High torque in small size.

Torque:

28-77 in-lbs @ 1-50 rpm's.

Clutch:

* 4.50" O.D. x .750" bore x 2.75" long.
* 75 watts heat dissipation.

Application:

Film tensioning clutch.

Benefits:

* +/- 5% torque accuracy.
* No break-in period.
* No stick/slip.
* Never replace or repair clutch.

Torque:

100 +/- 5 oz-in. Torque ripple: 5% total.

Clutch:

1.25" O.D. x 6mm bore x 1.40" long.

Application:

Slips at limit of linear motion travel.

Benefits:

* Extremely small size.
* Virtually unlimited life.
* No wear particles to contaminate mechanism.

Torque:

0.30 oz-in.

Clutch:

10mm dia x M4 threaded bore x 13 mm long.

Application:

Torque limiting in factory running 2 shifts/day.

Benefits:

* High torque in small size.
* 40,000+ hrs life.
* Continuous slip rated.

Torque:

30 oz-in +/- 10%.

Clutch:

.625" O.D. x .188" bore x 1.00" long.

Application:

Printer paper feed clutch.

Benefits:

* Low cost: simple 2 piece design.
* Life over 2 million revolutions.

Torque:

* 8 oz-in +/- 10% slip torque one direction.
* Direct drive opposite direction.

Clutch:

.625" dia. x .75" long.

Application:

Pinch roll brake allows motion then holds connected parts in location.

Benefits:

* Smooth torque with minimal slip/stick.
* Life far greater than 20 year machine life.

Torque:

55 in-oz +/- 10%.

Clutch:

1.50" rubber roller molded onto 1.00" clutch.